Rabbit R1 Rabbit R1
+1

Rabbit R1 manual

97%
found an answer to their question

Manuals

The PDF manuals of your Rabbit R1

r1 Operations Manual
Welcome to the r1 device. This manual is designed to provide an overview of the
device's physical operations, enabling factories to create testing procedures
accordingly.
Input Methods
The r1 device offers three physical input options for versatile operation:
• Gray Side Button (hereafter referred to as "the button"): Simplifies operations
with a multi-use single button.
• Front-facing Scroll Wheel (hereafter referred to as "the wheel"): Easy
navigation and precise control.
• Touch Screen (hereafter referred to as "the screen"): Intuitive interaction at
your fingertips.
Additionally, the device supports rotation and shaking actions, along with physical
feedback through haptic vibrations.
Fastboot Mode
Entry into Fastboot mode is achieved through a specific combination of keys on the
device. The mode and flashing of production devices are conducted using the
factory's software flashing tool.
Powering On
Hold the button for 3 seconds to power on the device from an off state.
Waking the Screen
• Tap the button to wake the screen.
• The screen can also be awakened through an app or background task.
Voice Input
• Hold down the button to activate the microphone for recording audio (push-to-
talk mode); the button must be held down for 250 milliseconds before the
microphone is activated.
• Release the button to deactivate the microphone and stop recording.
Activating the Camera
• Double-tap the button to activate the camera and rotate it to face the rear.
• When the camera is active, double-tap the button to turn off the camera and
rotate it downwards.
• While the camera is active, use the scroll wheel to change the camera's
orientation from front to back and vice versa.
• With the camera active, tapping the button captures a photo.
• When the camera is active, long pressing the button activates push-to-talk
mode without affecting the camera operations.
Volume Adjustment
In all states, holding down the button allows the scroll wheel to adjust the device's
volume.
Rotating the Device
• Rotation of the device is detected by the UI, displaying a virtual keyboard and
text entry component. This is triggered when the device is rotated to position
the scroll wheel beneath the screen.
Screen Sleep
• Without user input, the screen will sleep/turn off after a set number of seconds,
configurable by the user through the device settings.
• The app can keep the screen awake (hold a wake lock) as needed for displaying
video and while voice responses are played back.
Powering Off the Device
• The device is powered off through an option in the device's software settings.
Shaking the Device
• Shaking the device launches the settings app and activates the screen; the shake
threshold should be set to ensure the device is not activated through normal
usage or transportation.
This manual provides you with a basic guide to operating the r1 device. Please
familiarize yourself with each function as outlined in the guide to fully utilize the
capabilities of your r1 device.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- -Reorient or relocate the receiving antenna.
- -Increase the separation between the equipment and receiver.
- -Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- -Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This smart phone meets the government's requirements for exposure to radio
waves. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed to assure the
safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device
types: AI Companion (FCC ID: 2BFB4R1) has also been tested against this SAR limit.
The highest SAR value reported under this standard during product certification for
worn on the body is 1.316W/kg. This device was tested for typical body-worn
operations with the back of the handset kept 5mm from the body. To maintain
compliance with FCC RF exposure requirements, use accessories that maintain a
5mm separation distance between the user's body and the back of the handset. The
use of belt clips, holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be
avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 5mm must be
maintained between the user’s body and the handset, including the antenna. Third-
party belt-clips, holsters, and similar accessories used by this device should not
contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna.
CE Maintenance
1.
Use careful with the earphone maybe excessive sound pressure from
earphones and headphones can cause hearing loss.
2.
Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
3.
The product shall only be connected to a USB interface of TYPE-C.
4.
Adapter shall be installed near the equipment and shall be easily accessible.
5.
EUT Operating temperature range: -15° C to 40°C .
6.
Adapter: The plug considered as disconnect device of adapter
Power supply and ADP(rating):
Input: DC 5V 0.5A
7.
The device complies with RF specifications when the device used at 5mm you’re
your body.
8.
To prevent possible hearing damage. Do not listen at high volume levels for long
periods.
9.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
This product may be used in the following European member states subject to the
following restrictions. For products that operate in the frequency band 5.150 to
5.250 GHz, wireless access systems (WAS), including radio local area networks
(RLANs), shall be restricted to indoor use.
Declaration of Conformity
Dongguan wutong Intelligent Technology Co., Ltd hereby declares that this AI
Companion is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2)
and Article 10(10), This product is allowed to be used in all EU member states.
IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
RF Exposure Information and Statement
The SAR limit of Canada is 1.6 W/kg averaged over one gram of tissue. Device types: Mobile phone
(IC: XXXXX) has also been tested against this SAR limit. The highest SAR value reported under this
standard during product certification for use at the ear is worn on the body is 1.316W/kg. This device
was tested for typical body-worn operations with the back of the handset kept 5mm from the body.
To maintain compliance with IC RF exposure requirements, use accessories that maintain a 5mm
separation distance between the user's body and the back of the handset. The use of belt clips,
holsters and similar accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with IC RF exposure requirements,
and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements,
a minimum separation distance of 5mm must be maintained between the user’s body and the
handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this
device should not contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be avoided. Use only the
supplied or an approved antenna.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement
RF exposition Information et Déclaration
La limite du das au Canada est de 1,6 W/kg en moyenne sur un gramme de tissu. Types d’appareils: le
téléphone Mobile (IC: XXXXX) a également été testé contre cette limite de das. La valeur de das la
plus élevée déclarée en vertu de cette norme lors de la certification du produit pour une utilisation à
l’oreille et portée sur le corps est de 1,316w/kg. Cet appareil a été testé pour des opérations typiques
portant sur le corps avec le dos du combiné gardé à 5mm du corps. Pour maintenir la conformité avec
les exigences d’exposition aux RF d’ic, utilisez des accessoires qui maintiennent une distance de
séparation de 5mm entre le corps de l’utilisateur et le dos du combiné. L’utilisation de clips de
ceinture, de étuis et d’accessoires similaires ne doit pas contenir de composants métalliques dans son
assemblage. L’utilisation d’accessoires qui ne satisfont pas à ces exigences peut ne pas être conforme
aux exigences d’exposition aux RF IC et devrait être évitée.
Porté au corps Opération
Ce dispositif a été testé pour les opérations typiques portés sur le corps. Pour se conformer aux
exigences d'exposition aux radiofréquences, une distance de séparation minimale de 5mm doit être
maintenue entre le corps de l'utilisateur et le combiné, y compris l'antenne. Tiers pinces de ceinture,
étuis et autres accessoires similaires utilisés par ce dispositif ne doit pas contenir de composants
métalliques. accessoires qui ne répondent pas à ces exigences peut ne pas se conformer aux
exigences d'exposition RF et doit être évité Body-porté. Utilisez uniquement l'antenne fournie ou une
approbation.
* RF warning for Portable device:The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition without restriction.
L’appareil a été évalué pour répondre aux exigences générales en matière d’exposition aux RF.
L’appareil peut être utilisé en condition d’exposition portable sans restriction.

Product information

Product features and characteristics of your Rabbit R1 smartphone

Discover the Rabbit R1: The Pinnacle of Personal AI Technology Meet the Rabbit R1, the compact marvel that pushes the boundaries of personal AI technology. With its striking hero logo, practical dimensions of 78mm by 78mm by 13mm, and a light weight of just 115 grams, the Rabbit R1 is a powerful device that seamlessly combines comfort and functionality. The R1 is equipped with a durable battery that supports more than 500 charging cycles and has a charging capacity of 1000mAh. With the latest Bluetooth 5.0 technology, dual-band Wi-Fi, and 4G LTE connectivity, the R1 keeps you effortlessly connected, wherever you are. The device shines in a vibrant luminous orange color and features a powerful 2W speaker and an advanced dual microphone array for unmatched audio input. The intuitive interaction is enhanced by the 2.88-inch TFT touchscreen, making navigation a breeze. Powered by a MediaTek MT6765 octa-core processor with a maximum CPU frequency of 2.3GHz, 4GB of memory, and a whopping 128GB of storage space, the R1 performs exceptionally well under all conditions. The device is also equipped with a magnetometer and GPS for accurate location determination, while the accelerometer and gyroscope flawlessly record movements. The R1 operates within a wide range of operating temperatures from 0°C to 45°C, ensuring reliability under various climatic conditions. Photos and videos come to life in stunning quality with a resolution of 8MP for photos and 24fps in 1080p for videos. The versatility is further enhanced with an empty SIM card slot that is factory unlocked, allowing you to connect anywhere in the world. What truly sets the Rabbit R1 apart are the LAM functionalities that work excellently on the R1 device, such as search inquiries, music streaming, carpooling, ordering food, and visual tasks. With the Rabbit OS, users can enjoy bidirectional translations in an abundance of languages and soon, the operating system will be able to conduct multilingual conversations. The specifications and functionalities of the Rabbit R1 may be subject to change, and some LAM functionalities require an account connection through the 'rabbit hole'. Pre-sales orders for the Rabbit R1 to US and Canada addresses are expected to begin shipping in March-April 2024, with further shipments planned throughout the year. Orders to EU/UK addresses begin in late April, and shipping to Asia/Australia is expected later in 2024. The purchase of the Rabbit R1 is currently available in the United States, Canada, the United Kingdom, certain EU countries, South Korea, Japan, and Australia. The Rabbit R1 promises to revolutionize the way we interact with our technology, by providing a seamless, intuitive, and deeply personal experience that not only makes your digital life easier but also more enjoyable.

Videos (1)

View or upload videos of Rabbit R1

Rabbit R1 introduction video

https://www.youtube.com/watch?v=Hy2r7luwS10

Photos (2)

View or upload photos of Rabbit R1

Rabbit R1 smartphone Manual
Rabbit R1 smartphone Manual
Rabbit R1 smartphone Manual
Rabbit R1 smartphone Manual