Rabbit R1 Rabbit R1
+1

Rabbit R1 handleiding

75%
vond antwoord op hun vraag

Handleidingen

De PDF handleidingen van jouw Rabbit R1

r1 Operations Manual
Welcome to the r1 device. This manual is designed to provide an overview of the
device's physical operations, enabling factories to create testing procedures
accordingly.
Input Methods
The r1 device offers three physical input options for versatile operation:
• Gray Side Button (hereafter referred to as "the button"): Simplifies operations
with a multi-use single button.
• Front-facing Scroll Wheel (hereafter referred to as "the wheel"): Easy
navigation and precise control.
• Touch Screen (hereafter referred to as "the screen"): Intuitive interaction at
your fingertips.
Additionally, the device supports rotation and shaking actions, along with physical
feedback through haptic vibrations.
Fastboot Mode
Entry into Fastboot mode is achieved through a specific combination of keys on the
device. The mode and flashing of production devices are conducted using the
factory's software flashing tool.
Powering On
Hold the button for 3 seconds to power on the device from an off state.
Waking the Screen
• Tap the button to wake the screen.
• The screen can also be awakened through an app or background task.
Voice Input
• Hold down the button to activate the microphone for recording audio (push-to-
talk mode); the button must be held down for 250 milliseconds before the
microphone is activated.
• Release the button to deactivate the microphone and stop recording.
Activating the Camera
• Double-tap the button to activate the camera and rotate it to face the rear.
• When the camera is active, double-tap the button to turn off the camera and
rotate it downwards.
• While the camera is active, use the scroll wheel to change the camera's
orientation from front to back and vice versa.
• With the camera active, tapping the button captures a photo.
• When the camera is active, long pressing the button activates push-to-talk
mode without affecting the camera operations.
Volume Adjustment
In all states, holding down the button allows the scroll wheel to adjust the device's
volume.
Rotating the Device
• Rotation of the device is detected by the UI, displaying a virtual keyboard and
text entry component. This is triggered when the device is rotated to position
the scroll wheel beneath the screen.
Screen Sleep
• Without user input, the screen will sleep/turn off after a set number of seconds,
configurable by the user through the device settings.
• The app can keep the screen awake (hold a wake lock) as needed for displaying
video and while voice responses are played back.
Powering Off the Device
• The device is powered off through an option in the device's software settings.
Shaking the Device
• Shaking the device launches the settings app and activates the screen; the shake
threshold should be set to ensure the device is not activated through normal
usage or transportation.
This manual provides you with a basic guide to operating the r1 device. Please
familiarize yourself with each function as outlined in the guide to fully utilize the
capabilities of your r1 device.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- -Reorient or relocate the receiving antenna.
- -Increase the separation between the equipment and receiver.
- -Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- -Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This smart phone meets the government's requirements for exposure to radio
waves. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed to assure the
safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device
types: AI Companion (FCC ID: 2BFB4R1) has also been tested against this SAR limit.
The highest SAR value reported under this standard during product certification for
worn on the body is 1.316W/kg. This device was tested for typical body-worn
operations with the back of the handset kept 5mm from the body. To maintain
compliance with FCC RF exposure requirements, use accessories that maintain a
5mm separation distance between the user's body and the back of the handset. The
use of belt clips, holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be
avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 5mm must be
maintained between the user’s body and the handset, including the antenna. Third-
party belt-clips, holsters, and similar accessories used by this device should not
contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna.
CE Maintenance
1.
Use careful with the earphone maybe excessive sound pressure from
earphones and headphones can cause hearing loss.
2.
Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
3.
The product shall only be connected to a USB interface of TYPE-C.
4.
Adapter shall be installed near the equipment and shall be easily accessible.
5.
EUT Operating temperature range: -15° C to 40°C .
6.
Adapter: The plug considered as disconnect device of adapter
Power supply and ADP(rating):
Input: DC 5V 0.5A
7.
The device complies with RF specifications when the device used at 5mm you’re
your body.
8.
To prevent possible hearing damage. Do not listen at high volume levels for long
periods.
9.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
This product may be used in the following European member states subject to the
following restrictions. For products that operate in the frequency band 5.150 to
5.250 GHz, wireless access systems (WAS), including radio local area networks
(RLANs), shall be restricted to indoor use.
Declaration of Conformity
Dongguan wutong Intelligent Technology Co., Ltd hereby declares that this AI
Companion is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2)
and Article 10(10), This product is allowed to be used in all EU member states.
IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
RF Exposure Information and Statement
The SAR limit of Canada is 1.6 W/kg averaged over one gram of tissue. Device types: Mobile phone
(IC: XXXXX) has also been tested against this SAR limit. The highest SAR value reported under this
standard during product certification for use at the ear is worn on the body is 1.316W/kg. This device
was tested for typical body-worn operations with the back of the handset kept 5mm from the body.
To maintain compliance with IC RF exposure requirements, use accessories that maintain a 5mm
separation distance between the user's body and the back of the handset. The use of belt clips,
holsters and similar accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with IC RF exposure requirements,
and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements,
a minimum separation distance of 5mm must be maintained between the user’s body and the
handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this
device should not contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be avoided. Use only the
supplied or an approved antenna.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement
RF exposition Information et Déclaration
La limite du das au Canada est de 1,6 W/kg en moyenne sur un gramme de tissu. Types d’appareils: le
téléphone Mobile (IC: XXXXX) a également été testé contre cette limite de das. La valeur de das la
plus élevée déclarée en vertu de cette norme lors de la certification du produit pour une utilisation à
l’oreille et portée sur le corps est de 1,316w/kg. Cet appareil a été testé pour des opérations typiques
portant sur le corps avec le dos du combiné gardé à 5mm du corps. Pour maintenir la conformité avec
les exigences d’exposition aux RF d’ic, utilisez des accessoires qui maintiennent une distance de
séparation de 5mm entre le corps de l’utilisateur et le dos du combiné. L’utilisation de clips de
ceinture, de étuis et d’accessoires similaires ne doit pas contenir de composants métalliques dans son
assemblage. L’utilisation d’accessoires qui ne satisfont pas à ces exigences peut ne pas être conforme
aux exigences d’exposition aux RF IC et devrait être évitée.
Porté au corps Opération
Ce dispositif a été testé pour les opérations typiques portés sur le corps. Pour se conformer aux
exigences d'exposition aux radiofréquences, une distance de séparation minimale de 5mm doit être
maintenue entre le corps de l'utilisateur et le combiné, y compris l'antenne. Tiers pinces de ceinture,
étuis et autres accessoires similaires utilisés par ce dispositif ne doit pas contenir de composants
métalliques. accessoires qui ne répondent pas à ces exigences peut ne pas se conformer aux
exigences d'exposition RF et doit être évité Body-porté. Utilisez uniquement l'antenne fournie ou une
approbation.
* RF warning for Portable device:The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition without restriction.
L’appareil a été évalué pour répondre aux exigences générales en matière d’exposition aux RF.
L’appareil peut être utilisé en condition d’exposition portable sans restriction.

Product informatie

Producteigenschappen en kenmerken van jouw Rabbit R1 smartphone

Ontdek de Rabbit R1: Het Pinnacle van Persoonlijke AI-Technologie Maak kennis met de Rabbit R1, het compacte wonder dat de grenzen van persoonlijke AI-technologie verlegt. Met zijn opvallende hero-logo, praktische afmetingen van 78mm bij 78mm bij 13mm, en een licht gewicht van slechts 115 gram, is de Rabbit R1 een krachtig toestel dat comfort en functionaliteit naadloos combineert. De R1 is uitgerust met een duurzame batterij die meer dan 500 laadcycli ondersteunt en een oplaadcapaciteit van 1000mAh heeft. Met de nieuwste Bluetooth 5.0-technologie, dual-band Wi-Fi en 4G LTE-connectiviteit, houdt de R1 je moeiteloos verbonden, waar je ook bent. Het apparaat schittert in een levendige leuchtorange kleur en is voorzien van een krachtige 2W-luidspreker en een geavanceerde dubbele microfoonarray voor ongeëvenaarde audio-invoer. De intuïtieve interactie wordt versterkt door het 2.88-inch TFT-touchscreen, wat de navigatie een fluitje van een cent maakt. Aangedreven door een MediaTek MT6765 octa-core processor met een maximale CPU-frequentie van 2.3GHz, 4GB geheugen en maar liefst 128GB opslagruimte, presteert de R1 uitzonderlijk goed onder alle omstandigheden. Het toestel is ook uitgerust met een magnetometer en GPS voor nauwkeurige locatiebepaling, terwijl de accelerometer en gyroscoop bewegingen vlekkeloos registreren. De R1 functioneert binnen een breed scala van bedrijfstemperaturen van 0°C tot 45°C, wat zorgt voor betrouwbaarheid onder verschillende klimaatomstandigheden. Foto's en video's komen tot leven in verbluffende kwaliteit met een resolutie van 8MP voor foto's en 24fps in 1080p voor video's. De veelzijdigheid wordt nog verder versterkt met een lege SIM-kaartslot dat fabrieksvrij is, waardoor je overal ter wereld verbinding kunt maken. Wat de Rabbit R1 echt onderscheidt, zijn de LAM-functionaliteiten die voortreffelijk werken op het R1-apparaat, zoals zoekopdrachten, muziek streamen, carpoolen, eten bestellen en visuele taken. Met de Rabbit OS kunnen gebruikers genieten van tweerichtingsvertalingen in een overvloed aan talen en binnenkort zal het besturingssysteem meertalige gesprekken kunnen voeren. De specificaties en functionaliteiten van de Rabbit R1 zijn wellicht aan verandering onderhevig en sommige LAM-functionaliteiten vereisen een accountverbinding via het 'rabbit hole'. Voorbestellingen voor de Rabbit R1 naar adressen in de VS en Canada worden verwacht te beginnen met verzenden in maart-april 2024, met verdere zendingen gepland door het jaar heen. Bestellingen naar EU/UK-adressen beginnen eind april, en verzending naar Azië/Australië wordt later in 2024 verwacht. De aanschaf van de Rabbit R1 is momenteel mogelijk in de Verenigde Staten, Canada, Verenigd Koninkrijk, bepaalde EU-landen, Zuid-Korea, Japan en Australië. De Rabbit R1 belooft een revolutie teweeg te brengen in de manier waarop we met onze technologie omgaan, door een naadloze, intuïtieve en diep persoonlijke ervaring te bieden die jouw digitale leven niet alleen gemakkelijker maar ook aangenamer maakt.

Video's (1)

Bekijk of upload video's van de Rabbit R1

Rabbit R1 introduction video

https://www.youtube.com/watch?v=Hy2r7luwS10

Foto's (2)

Bekijk of upload foto's van de Rabbit R1

Rabbit R1 smartphone Handleiding
Rabbit R1 smartphone Handleiding
Rabbit R1 smartphone Handleiding
Rabbit R1 smartphone Handleiding

Vergelijkbare handleidingen

Puky R1

Puky R1

Scooters
1565
Samsung R1

Samsung R1

Speakers
1671
Acer R1 R271

Acer R1 R271

Monitors
1778
Trust Smartphone Travel Charging Kit

Trust Smartphone Travel Charging Kit

Opladers voor mobiele apparatuur
860
Blaupunkt KPT-R1

Blaupunkt KPT-R1

Radio's
1732
Sony MEX-R1

Sony MEX-R1

Autoradio's
1202